Nikon Camera Control Pro 2.28.0

Nikon Camera Control Pro 2.28.0

  • کاربرد : مدیریت دوربین های نیکون
  • نسخه :Version 2.28
  • نوع فایل : نرم افزار
  • زبان : انگلیسی
  • سیستم عامل : Windows 32 & 64 Bit
  • تولید کننده : Nikon Corporation
  • سال تولید : 2018

توضیحات

نام نرم افزاری جدید و حرفه ای ، به منظور مدیریت و کنترل تنظیمات دوربین های SLR نیکون به صورت از راه دور است. شما می توانید دوربین دیجیتال نیکون خود را با کابل مخصوص به کامپیوتر متصل کنید و یا از طریق ارتباط بی سیم ، به مدیریت آن بپردازید. بسیاری از تنظیمات دوربین های SLR شرکت نیکون ، به وسیله ارتباط از راه دور کامپیوتر قابل تنظیم و مدیریت است. از جمله این تغییرات می توان به مواردی همچون سرعت شاتر ، حالت تنظیم نور و همچنین دیافراگم اشاره کرد.

یکی از قابلیت های مهم نرم افزار Nikon Camera Control Pro ، امکان مدیریت وکنترل تنظیمات به صورت از راه دور و بی سیم است. به کمک این نرم افزار شما می توانید تصاویر ثبت شده توسط دوربین های نیکون را به صورت بی سیم به محیط کامپیوتر و نرم افزار Nikon Camera Control Pro منتقل کرده و آنان را در محیطی زیبا و حرفه ای مدیریت کنید. به کمک ویژگی هوشمند Enhanced Viewer شما می توانید مجموعه تصاویر منتقل شده به کامپیوتر را به صورت بند انگشتی ببینید و سپس اقدام به مشاهده آنان نمایید.







ویژگی های نرم افزار Nikon Camera Control Pro :

– مدیریت تنظیمات دوربین ها از طریق ارتباط با کابل USB

– قابلیت ارتباط به صورت بی سیم یا USB

– امکان تغییر تنظیمات به صورت از راه دور

– شخصی سازی تنظیماتی از قبیل سرعت شاتر ، حالت تنظیم نور و همچنین دیافراگم

– انتقال تصاور به محیط نرم افزار در کامپیوتر

– پیش نمایش زیبای تصاویر ثبت شده در محیطی کاربردی

Description

This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon's exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.

Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
Enhanced viewer function enables thumbnail display of images stored in a computer.

Compatible with the new functions of the Nikon D3/D300
Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
51-point AF can be controlled and displayed.
Fine tuning of the new white balance is available.

Integration with other Nikon software
Support for ViewNX browser and viewer software
Support for Capture NX photo-finishing software

Operating System: Windows 7, 8/8.1, 10

برای اطلاع از طریقه نصب به فایل How to Install.txt رجوع شود.

اگر شما نسبت به این اثر یا عنوان محق هستید، لطفا از طریق "بخش تماس با ما" با ما تماس بگیرید و برای اطلاعات بیشتر، صفحه قوانین و مقررات را مطالعه نمایید.

دیدگاه کاربران


لطفا در این قسمت فقط نظر شخصی در مورد این عنوان را وارد نمایید و در صورتیکه مشکلی با دانلود یا استفاده از این فایل دارید در صفحه کاربری تیکت ثبت کنید.

بارگزاری