ThinkParametric - Creating a Waffle Structure with Grasshopper and Rhinoscript
- کاربرد : آموزش ایجاد ساختار Waffle با گرس هاپر و راینواسکریپت
- نوع فایل : فیلم آموزشی
- زبان : انگلیسی
- سیستم عامل : Windows-Mac-Linux-Android-iOS
- تولید کننده : ThinkParametric
- سال تولید : 2017
توضیحات
در این دوره آموزشی از شرکت thinkparametric ، مربی دوره Rodrigo Medina ، به آموزش چگونگی ایجاد stereotomy غیر استاندارد یا ساختارهای وافل با گرس هاپر و راینو اسکریپت می پردازد. تنظیمات سطح انحنای دابل ، استخراج ساختار وافل ، ایجاد دیفینیشن پارامتری، نحوه کدنویسی اسکریپت برای اتوماتیک کردن تمام اتصالات عناصر از جمله مواردی است که در این دوره آموزشی خواهید آموخت.
عناوین اصلی این دوره آموزشی:
ایجاد سطح با منحنی راهنما
استخراج rib از سطح میزبان
پالایش دیفینشن ها برای بدست آوردن سطوح پاک کننده
تنظیمات متغییر اصلی در RhinoScript
کد نویسی حلقه ها و دستورات شرطی
کد نویسی عملیات هندسی
Laying Down و برچسب گذاری Rib ها برای Laser Cut
و …
عناوین اصلی این دوره آموزشی:
ایجاد سطح با منحنی راهنما
استخراج rib از سطح میزبان
پالایش دیفینشن ها برای بدست آوردن سطوح پاک کننده
تنظیمات متغییر اصلی در RhinoScript
کد نویسی حلقه ها و دستورات شرطی
کد نویسی عملیات هندسی
Laying Down و برچسب گذاری Rib ها برای Laser Cut
و …
Description
In this course, you are going to learn how to create a non-standard stereotomy (or what people commonly call “waffle structures”) using Grasshopper and Rhinoscript.
We´ll start by setting up a double curvature surface as our host geometry. Then we´ll use this one to extract our waffle-like structure from it by creating a parametric definition that will allow use to control the position and number of surface elements.
Then you are going to learn how to code a script to automatize all the connections or notches of your elements.
Finally, we will lay down all the resulting surfaces with their connections in our X, Y Plane and label them, so we can later laser cut and assemble in a physical study model.
We´ll start by setting up a double curvature surface as our host geometry. Then we´ll use this one to extract our waffle-like structure from it by creating a parametric definition that will allow use to control the position and number of surface elements.
Then you are going to learn how to code a script to automatize all the connections or notches of your elements.
Finally, we will lay down all the resulting surfaces with their connections in our X, Y Plane and label them, so we can later laser cut and assemble in a physical study model.